Introduction to Bus Connector Product Knowledge

The function of the busbar connector:

This circuit is blocked before blocking or isolating the circuit, as a bridging function, assuming the task of current or signal transmission. The lamp connector is mainly used for the transmission of signals and images between front and rear seats required by modern premium cars and other customized connectors are widely used in instrument panel, antenna, vehicle information interconnection, intelligent transportation system, electronic toll collection system, etc. The horn connector is usually composed of a square plastic socket and several neatly arranged square pins. The difference between a simple cow connector and a cow horn connector is that the simple cow horn has removed the buckles on both sides. The difference between connectors and horn connectors is that the simple horn has removed the clips on both sides. Usually used with pins to form a plate to plate connection; Or matched with the use of electronic wiring harnesses composed of board wires; Or independently connected to the board to board.

Classification of busbar connectors:

1. Bus connectors can be divided into 0.8mm, 1.0mm, 1.27mm, 2.0mm, and 2.54mm according to their spacing.
2. The main connector of the row can be divided into convex points, semi convex points, and fully convex points based on the height of the plastic and whether there are concave and convex points.
3. The row main connector can be divided into U-type terminal and Y-type terminal according to the terminal type
4. Packaging of female connector terminals: Frying pan, package, batch, etc.
5. The terminal materials of bus connector include brass, Phosphor bronze, etc.
6. The row connector uses plastic materials such as pbt, pa46, pa6t, pa9t, etc.
7. The electroplating treatment for the end face of the main connector is: gold plating, tin plating, nickel plating, imitation gold, etc.
According to the sub row with 8 columns of female connectors: a row can be divided into single mother, double mother columns, with three mothers in a row and four mothers in a row. Currently, the row with the highest ranking of 4 female connectors.
No. 9. Bus connectors can be divided into 180 degree bus (straight bus), 90 degree bus (bent foot bus), SMT bus, etc. according to the installation method.
10. The row bus connector is divided based on whether additional and positioning columns are needed: one is a row bus with positioning inner columns, and the other is a row bus with ear positioning columns.